JJ Electronics 12AT7 - ECC81 Preamp Vacuum Tube
The JJ Electronic 12AT7 / ECC81 is a good choice for phase inverters, reverb drivers, and general preamp use. This tube offers low noise, low microphonics, and warm smooth tones at a great price. Like all JJ tubes, it has a rugged construction that doesn’t compromise the sound of your amp. The JJ 12AT7 is a solid replacement for any 12AT7, ECC81, or 6201 tube. It can also be used to replace 12AX7 tubes in position 1 to reduce gain.
| Body Height | 49.2 mm | |
| Cathode Current (Ik) | ≤ 15 mA | |
| Filament Current (If) | 300 / 150 mA | |
| Filament Voltage (Uf) | 6.3 / 12.6 V | |
| Gain (μ) | 60 | |
| Grid Circuit Resistance (Rg) | 1 MΩ | |
| Grid Voltage (Ug) | ≥ -50 V, -2 V typical | |
| Heater to cathode voltage (Uk/f) | ≤ 90 V | |
| Internal Resistance (Ri) | 11 kΩ | |
| Item Diameter | 22 mm | |
| Item Height | 56.3 mm | |
| Plate Current (Ia) | 10 mA | |
| Plate Dissipation (Wa) | ≤ 2.5 W | |
| Plate Voltage (Ua) | ≤ 300 V, 250 V typical | |
| Transconductance (S) | 5.5 mA/V |